Diesel fuel cleaning is a must in this day and age for those who are starting to notice contaminants in the fuel. Those who are unaware are the ones who are going to have their motor stop running. This is the last thing you need, so let’s take a look at a few key steps to consider in diesel fuel cleaning.
Assess For Contaminants First
You have to make sure the diesel fuel has to be cleaned first, or you could be wasting a lot of time for no reason. There are a few signs you can look for such as sludge in the fuel.
Make sure to take a bit out from the center and see how it looks. Is it hazy? Is it dirty? These are questions to be answered and ticked off on a checklist beforehand.
It will let you know what you are going to be treating with the cleaning process in full flow.
Keep System ‘Primed’
You have to keep the system primed to maximize the cleaning process. What does this mean for those who are unaware? The priming of a system means you are going to prepare the setup to make sure it is working as needed.
You are going to place the pump in the center and take a little sample. This is going to be a test run of sorts, and you are going to make sure the pump is not drained entirely.
Cleaning on a ‘dry’ pump is a horrible idea and will lead to a lot of troubles unnecessarily. Make sure the pump is not dry before commencing.
Pump From The Center
This is a common mistake made and should not be happening by those who are prepared and understand what to do. The goal should be to pump from the center rather than the sides when cleaning the fuel. By going into the center, the chances of seeing better results increases and this is what you are going to be aiming for in the first place.
Keep Pump Running When Draining
When you are draining the fuel present in the pump after the process has been completed, you’re going to need to keep the pump running. What is this going to do for you?
It is going to ensure the fuel is not being wasted at any point, which is not worth it at all and is going to cost money for no reason. Make sure you are draining with care.
These tips should be used to make sure you are going about the diesel fuel cleaning process as efficiently as possible. Those who don’t pay attention to this are the ones who are not going to be happy with how the fuel cleaning process went. There is no excuse for messing this up as long as you are meticulous with your approach and have the right pump in hand to get going. As long as you have these ‘ingredients’ in place, you are going to be more than good to go with the cleaning process.